STRUCTURED CABLING



ENCLOSURES, RACKS, AND CABLE MANAGEMENT


Hinged Wall Brackets

19-in. Hinged Panel

DOWNLOAD/VIEW SPEC SHEET

The 19-in. Hinged Panel provides a solution for smaller network equipment, punch-downs and patch panels in areas where floor space is at a premium.

 

 

Pivoting Panel Mount

DOWNLOAD/VIEW SPEC SHEET

Unique design allows punching down while fully open
Available in 3 depths: 6", 12" & 18"
Solid back and open back design for mounting over wall obstructions such as conduit or raceways
Abundant internal tie points for cable management
Includes hook and loop cable fasteners
Finished in durable black powder coat
Rack screws included
Optional security doors available

 

 

 

Wall Racks

Hinged Wall Racks

DOWNLOAD/VIEW SPEC SHEET

VERSARACK™ is used for wall mounting and securing 19-inch rack equipment for Telecommunication Rooms and other locations. The rack provides for either left or right hinging to accommodate a variety of applications. These open frame racks are ideal for high-density cabling application. VERSARACK is ideal for IDFs (Intermediate Distribution Frames), remote 19-inch rack equipment, building automation, security and many other applications.

VERTICAL CABLE MANAGER

VERSARACK™ offers a complimentary vertical cable manager that easily attaches to the right or left side of Swing-Out Rack. Each accessory includes one fully-assembled manager with retaining hardware and installation instructions. One or two can be attached to fit the application. The manager is made of formed steel with composite support fingers. The vertical cable managers provides for easy and convenient cable management for high-density applications.

 

Fixed Wall Mount Racks

DOWNLOAD/VIEW SPEC SHEET

Economical solution for banks of small networking equipment. Integral VELCRO® cable tiedown slots facilitate cable routing. Made of 16 gauge steel, finished with RAL 9005 low gloss black polyester powder paint. Shipped in four easy-to-assemble sections.

 

Sideways Panel Mount

DOWNLOAD/VIEW SPEC SHEET

Saves Space By Mounting Equipment Flat to The Wall
Low-profile mounting of hubs, etc.
3 position rackrail mounting to accommodate cable managers
Abundant rear cable lacing points
10-32 threaded rackrail
All-steel construction
Rackscrews included
Durable black powder coat finish

 

 


 

 

 

 

Open Frame Racks

2-Post Open Frame Rack

DOWNLOAD/VIEW SPEC SHEET

Designed for use in communication data centers and telecommunication rooms, 2-Post Open Frame Racks satisfy basic functional requirements for structuring cable. 

Features

• Range of heights from 4 ft. to 9 ft. (24U to 58U) to match capacity requirements; 19-in. Rack Packages are 7-ft. high
• Side rails are tapped on both sides with 12-24UNC threads for quick installation
• EIA Universal 5/8 in. - 5/8 in. - 1/2 in. vertical mounting hole pattern matches industry standards
• RU markings on both front and back of uprights make it easier to mount equipment
• Packed unassembled in individual cartons; assembly hardware (including twenty 12-24 mounting screws) is furnished for convenient storage and installation

 

4-Post Open Frame Rack

DOWNLOAD/VIEW SPEC SHEET

4-Post Open Frame Racks combine the mounting security of a cabinet with the accessibility of a rack. Used in communication data center and telecommunication room applications, these adjustable-depth racks support deeper, heavier network equipment and can be ganged with standard 2-post or other 4-post racks to expand existing systems.

Features

• Depth adjustable 450 mm to 1050 mm (17.7 in. to 41.3 in.) in 25-mm (.98-in.) increments
• EIA universal 5/8 - 5/8 - 1/2 in. spaced 12-24 tapped holes or .375-in. square holes fit 19-in. rack equipment
• Compatible with 19-in. rack accessories
• Available with nominal frame height of 6, 7 and 8 ft.
• RU markings on both front and back of tapped-hole uprights make it easier to mount equipment
• Floor mounting holes predrilled at .750-in. diameter
• 12-24 rack mounting screws (pkg. of 20) included with tapped-hole model
• For square hole model, order screws and cage nuts separately
• Can be ganged with both 2- and 4-Post Open Frame racks
• Includes complete assembly instructions
• Shipped unassembled for convenient transport to job site

 

 

Cable Management

Vertical Cable Management

DOWNLOAD/VIEW SPEC SHEET

Leviton's unique Versi-Duct system is a versatile cable management solution for copper and fiber installations. The innovative system fits on any standard equipment rack, and accessories enable a wide range of cable management configurations.

Injection molding eliminates sharp edges and protects cable integrity
Extremely durable ABS plastic channels withstand years of use in demanding environments
PVC plastic is an economical and sturdy material for channel covers
40" and 80" channels are available in front only or front and rear configurations
All channels include cable-concealing cover
Large finger passthrough space aligns with rack units
Integrated dual-hinge for easy accessibility

 

CABLETEK™-EC Vertical Cable Manager

DOWNLOAD/VIEW SPEC SHEET

Attach CABLETEK™-EC Vertical Cable Managers to the sides and/or in between open-frame racks to economically provide support, easy access and proper cable management with easy cable installation for Network rack-mount equipment. The front side provides support, management and high cable capacity for patch cords with easy-to-remove front covers standard. The rear of the manager provides the same support for horizontal cabling (Cat 5e, 6, 6A and fiber). CABLETEK-EC Vertical Cable Managers are available in single- and double-sided versions.

 

CABLETEK™ Vertical Cable Manager

DOWNLOAD/VIEW SPEC SHEET

• Easily removable one-piece front cover with access from right or
• Double-sided models include five posts and gates that can be
positioned as needed to support and contain cables. Additional
posts and gates available as accessories.
• Posts snap into prepunched holes in the back of the cable manager
• Gates snap onto posts, open from left or right as needed and
swing 280º for cable access. Posts can be used alone as slack
spools to control long patch cords.
• Horizontal and vertical cable managers designed as a system for
streamlined appearance and improved functionality
left as needed opens 180º to allow full access to cables
• Self-aligning bolt locations minimize lifting and speed installation
• Self-captivating fasteners; bolt doesn’t turn while tightening nut
• Generous finger depth allows for maximum cable density and
allows smooth transitions from vertical to horizontal positions
• Unobstructed cable access to rack equipment—no keep-out areas
• Rounded edges on composite material and grommets protect
cable jackets from damage
• Robust arrowhead fingers are shaped to funnel cables into base
and are made of black composite material
• Cable tiedown points provided on back
• Pass-through holes protect cable while facilitating routing
between front and back
• Single central door latch allows quick and easy access to cables

 

Versi-Duct® Horizontal Cable Management

DOWNLOAD/VIEW SPEC SHEET

Fits all standard 19" racks
Horizontal managers include bend radius compliant clips
Finger spacing aligns with Leviton patch panel port openings to better manage patch cords

 

Horizontal Cable Managers

DOWNLOAD/VIEW SPEC SHEET

Available in 1RU, 2RU and 4RU sizes
All mount to standard 19" racks and cabinets
4RU manager includes a shelf to support patch cords
Horizontal managers support transition to vertical management
Combo Manager offers front and rear management

 

Horizontal Cable Managers

DOWNLOAD/VIEW SPEC SHEET

 

Horizontal Wire Manager

HellermannTytons enhanced horizontal wire managers protect cable and maintain its integrity on a standard 19" rack. The high quality injection molded wire managers possess a one-inch minimum radius, which guards against extensive bending of the cables and increases transmission reliability. Using the enhanced horizontal wire managers makes installing and rework faster and easier. Snap-on, injection molded covers hinge down for easy access to patch cords in front of rack during moves, adds, and changes (MACs). HellermannTyton's enhanced horizontal wire managers aesthetic design includes a clean look with textured covers, preventing fingerprints.
Dual-sided, 2U horizontal wire manager
3.5" x 3" front, 3.5" x 6" back
The smooth edges and the wide spacing allow for easy routing of cable bundles
Mounting holes and slots on the sides of the management system permit easier alignment on the rack and faster installation
The sloped design in the rear maintains room for cable bundles and ensures easy access to patch panels

PART# EHWM2

 

Wall Mount Enclosures

ACCESSPLUS™ II Double-Hinge, Type 1

DOWNLOAD/VIEW SPEC SHEET

A

CCESSPLUS™ II Cabinets provide security, equipment access, cooling and support for network and other 19-in. rack-mount equipment. The cabinet has three components: front door, center section and wall section.

• Double-hinged for easy equipment access; center section provides 19-in. rack mounting per EIA universal spacing and is accessed through the front door or swing the center section away from the wall section for rear access
• Round corners; no sharp edges
• Front door has either a solid steel or hardened, tinted safety-glass window door for superior scratch resistance
• Center section easily removed from rear section; tool-less one-person installation possible
• Self-grounding, plated steel rack angles fully adjustable within center section
• Wall section provides cable entry and cable management with knockouts or gland plates
• Gland plate model provides easy retrofit and fast installation and allows for pre-terminated cables or pre-wired patch panels; no need to re-terminate and test
• Self-locking center-to-wall section latches in two locations
• Front access to all latches (no exposed side latches); cabinet can be installed tightly in corners
• Vented sides provide cross flow ventilation to improve heat dissipation
• Vertical cable manager included in 28-in.-wide models
• A full line of accessories is available

 

PROTEK™ Double-Door, UL and NEMA Type 4, 4x or 12

DOWNLOAD/VIEW SPEC SHEET


• Type 12 cabinets available with solid or window doors and have
a locking wing knob with two keys. They provide security and
convenience in indoor applications.
• Type 4 cabinets have solid doors and a padlock-capable quarterturn
latch. They provide easy operation and locking options in
indoor and outdoor applications.
• Solid door provides complete physical and visual protection
• Window door, made with scratch resistant safety glass, allows
equipment monitoring without opening the door to minimize
contamination
• Double-hinged for easy equipment access
• Front access to center body hinging and back section latches
• Exclusive toolless self-fastening latch is easy to open, yet
automatically closes securely
• Latch on front of door eliminates need to access sides to open door
or back section latches
• Latch-free sides permit side of cabinet to be installed tightly into a
corner
• Fully welded and ground body and door construction for longterm
good appearance and durability
• Foam-in-place seamless gasket around door seals against outdoor
air infiltration; is non-absorbing and chemical resistant
• One set of adjustable tapped rack angles included
• Optional square hole rack angles available for equipment
mounting flexibility
• Rack angles are plated and self-grounding for durability and safety
• Collar studs provided on back of cabinet for mounting accessory
Panels

PROTEK® Fan and Filter Packages are ideal for protecting sensitive
19-in. rack equipment from harmful environmental contaminants
such as falling dirt, dust and dripping water. Use for applications
where the ambient air can be used to cool the internal equipment
and where protection from falling dirt and dripping water is needed.
Filters assist in removing contaminants and are easily removed for
periodic cleaning without accessing the cabinet. Top-mounted fans
provide increased airflow and maximize heat dissipation of internally
mounted equipment. Both top-mounted fans and bottom-mounted
intake filters are positioned away from 19-inch rack-mounting areas.

D-BOX™, Type 1

DOWNLOAD/VIEW SPEC SHEET

Ideal for retail applications where it is necessary to house 19-in. network equipment in a public location, the horizontally-oriented D-BOX™ is a low-profile cabinet with a hinged door for convenient front access and a combination of fixed and rotating rack angles to accommodate varying equipment sizes.

 

 

DOWNLOAD/VIEW SPEC SHEET

UL Listed in the US and Canada
Allows mounting of equipment in a vertical "knobs up" fashion
Equipment mounts to backpan for even weight distribution
1/2" & 1-1/2" laser knockouts in the backpan top and bottom
Hinged top cover allows user access to controls
Hinged body allows installer access to connections
Top cover and body lock, and are keyed separately
Two bottom located fan mounting positions with guards (fans not included)
Vented front for cooling
Adjustable front rackrail provides 20” to 23” useable equipment depth
150 lb. weight capacity
Finished in a durable putty powdercoat
Also available with a solid top cover and black finish (WRS)

 

 

Rack Enclosures

Net Series Communication and Server Cabinet

DOWNLOAD/VIEW SPEC SHEET

• In 600-mm wide cabinets, equipment mounted on 19-in. rack
angles is centered
• In 700- and 800-mm wide cabinets, 19-in. rack angles can be set to
center equipment or to mount equipment next to the left or the
right side for improved cable management
• Rack angles infinitely positionable within the cabinet for easy
adjustment to desired position
• All doors are field removable and reversible with left or right
hinging for installation flexibility
• Communication cabinet has fully perforated or window front and
louvered rear doors for equipment ventilation
• Server cabinet has fully perforated front and split rear perforated
doors for easy access to servers
• Doors have key-locking handles that provide security with
convenient access for authorized personnel
• Removable side panels with quarter-turn key-locking latch are
inset for flush appearance
• Two cable entry ports with caps and grommets on cabinet top for
wiring ease
• Fan-ready top with integral finger guard. Order up to two 6-in. fans
separately.
• Caster- and leveler-ready open base design. Order casters and
levelers separately.

 

Proline™ Connectek™ Communications (Patch) Cabinet

DOWNLOAD/VIEW SPEC SHEET

The PROLINE™ CONNECTEK™ Network Communication/Patch Cabinets feature two vertical cable managers in the front of the cabinet and two rear cable managers for maximum cable routing and support. Cabinets are available in two widths to accommodate high-density cables, patch cords and networking equipment.
Features

• Rigid front door made of aluminum extrusions and formed perforated steel offers highly attractive appearance and durability
• Fully perforated top, front door and rear doors allow maximum air movement around cables, patch panels and other network equipment; conforms to server manufacturer open space requirements
• Includes front cable manager with covers and rear open cable managers to support and route cable. See Cable/Power Management for cable manager specifications.
• Cable managers included with 700-mm wide cabinet: Front - PVF207; Rear - PRBTD205
• Cable managers included with 800-mm wide cabinet: Front - PVF208; Rear - PRBTD2010
• Models without sides fit together quickly for easy installation in ganged applications; can be ganged with server cabinets or with additional Hoffman patch cabinets
• Three-point locking pushbutton swing handle on front door provides easy but controlled access. Two keys included.
• Rear doors are split for easy access and include 3-point, low-profile, locking swing handle
• Two sets of tapped 19-in. rack angles support both front and rear of equipment
• Rack angles are infinitely adjustable from front to rear for positioning flexibility
• Large gland plate in top allows easy routing of cable, pre-terminated cables and patch panels
• Twenty 10-32 screws are included

 

Proline™ Voice/Data and Server Cabinet, Type 12

DOWNLOAD/VIEW SPEC SHEET

• Three-point locking handles on all doors provide easy but
controlled access; two keys included
• Fully welded frame safely supports sensitive equipment
• Fully gasketed to keep contaminants away from equipment,
reducing maintenance costs
• Two sets of 19-in. rack angles support both front and rear of
equipment
• Rack angles are infinitely adjustable from front to rear for
positioning flexibility
• Mobile base provides easy placement of cabinet
• Levelers and anti-tip bracket secure cabinet to the floor
• Welded 12 gauge steel frame with integral struts
• Front window door made of 16 or 14 gauge steel with safety glass
window
• Solid 16 or 14 gauge steel back door
• Standard package has solid 16 or 14 gauge steel sides
• AC package has cutout for easy in-the-field installation of any CR29
Series Air Conditioner (shipped separately)
• Models available with EIA Universal standard 3/8-in. square or 10-
32 tapped holes
• Mobile base includes casters, levelers and gland plate
• Gland plate allows easy routing of cable

 

BGR Series Gangable Rack Enclosures

DOWNLOAD/VIEW SPEC SHEET

This is the "Next Generation" Rack you have been wanting! BGR series racks have higher weight capacities, provide more useable rackspace, and incorporate more functionality than any other rack system on the market. Features the revolutionary patent-pending LeverLock™ system for tool free installation of cable management accessories. New options include brush grommet rear doors and problem-solving extender bays. Choose a BGR enclosure for the highest level of space efficiency and strength available, and to enable the use of the latest options for installation flexibility.

Structural Features

Breakthrough design provides more useable rack height – for example, the 45 space version overall height is shorter than 44 space alternative models
Accepts patent-pending LeverLock™ system accessories for fast, flexible cable management and mounting of small devices such as interface boxes, power supplies, and relay modules
Unique new extender bay adds 3" of useable depth to the front or rear of the enclosure at any time. Extender bays allow the use of existing doors and can even be stacked for greater depths
Pre-threaded ganging holes allow ganging while fully loaded
Wide open bottom accepts multiple base options
Standard front and rear adjustable wide, heavy-gauge, 10-32 threaded rackrail with numbered rackspace increments speeds equipment mounting
Labels included to indicate rail position front to back
Finished in a durable black textured powder coat

WRK Series 19" Gangable Enclosures

DOWNLOAD/VIEW SPEC SHEET

Generous 24-1/4" OD width provides room for cables
1/2", 3/4", 1" and 1-1/2" electrical knockouts found on removable split rear plates, top knockout plate additionally includes UHF/VHF antenna knockouts
Available in 2 depths: 27-1/2" or 32-1/2"
2 extra-wide pairs of 10-32 threaded rackrail standard
Cable pass-throughs located in the face of the standard front and rear adjustable 11-gauge, 10-32 threaded, extra-wide rackrail facilitate the passing of cable from the face of the equipment to the rear
Laser-cut 1/8" thick internal steel braces for strength
14-gauge steel tops & bottoms, 16-gauge seamless steel sides
Stud in base of enclosure facilitates the proper grounding and bonding of electronic equipment, as per NEBS and NEC standards
Configurable open top accepts a number of top options
Standard locking rear door incorporates spring loaded latch to keep door closed without key
Finished in a durable black textured powder coat

ERK Series Enclosures

DOWNLOAD/VIEW SPEC SHEET

Fully welded construction, solid sides
2,500 lb. weight capacity
1/2", 3/4", 1" and 1-1/2" electrical knockouts found on removable split rear plates, top knockout plate additionally includes UHF/VHF antenna knockouts
16-gauge steel tops, bottoms, & sides
Laser-cut 1/8" thick internal steel braces for strength
1 pair fully-adjustable front rackrail
Large cable entry in bottom
Grounding and bonding stud installed in base
Configurable top (44, 40, 35 sp.), solid top with fan KO’s (27, 21, 18 sp.)
Laser KO’s in side panels for cable pass-through (44, 40, 35 sp. only)
Finished in a durable black textured powder coat

 

Rack Accessories

Thermal Management

DOWNLOAD/VIEW SPEC SHEET

Fan trays enhance the natural convection airflow within a cabinet
when installed with other 19-in. rack-mount equipment.

Compact Cooling Fans are ideal for applications where enclosure
space is limited and quiet, reliable cooling is required. Engineered for
50,000 hours of continuous operation without lubrication or service.

Perfect for offices, classrooms and other noise-sensitive areas, Fan
Speed Controls optimize airflow in a cabinet or rack, balancing air
volume requirements with noise level and power use.

 

Rack Accessories

DOWNLOAD/VIEW SPEC SHEET

Create a configuration that meets your exact requirements. Select from
a comprehensive assortment of accessories that complement our broad
product line.
From shelves to lighting to mounting hardware, it’s all here and ready to
support your system’s reliable operation.

 

Universal Rackshelves

DOWNLOAD/VIEW SPEC SHEET

These easy-to-install shelves fit all components up to 17 3/8" wide to quickly meet all of your rackmounting needs. Made from 16-gauge steel, each unit is individually boxed.

 

Rackmount LCD, Keyboard and Touchpad, with KVM Switch

DOWNLOAD/VIEW SPEC SHEET

Space saving design occupies a single rackspace
No hassle 1 year warranty
Easy to read bright active matrix LCD display
LCD can be in open position for system monitoring while keyboard is in the closed position
Standard 105 key keyboard with touchpad
17" monitor is capable of supporting 1280 x 1024 screen resolution
Rear articulating cable carriers provide cable strain relief

Rack Drawers

DOWNLOAD/VIEW SPEC SHEET

Space saving design occupies a single rackspace
No hassle 1 year warranty
Easy to read bright active matrix LCD display
LCD can be in open position for system monitoring while keyboard is in the closed position
Standard 105 key keyboard with touchpad
17" monitor is capable of supporting 1280 x 1024 screen resolution
Rear articulating cable carriers provide cable strain relief

 

LCD Rackmount

DOWNLOAD/VIEW SPEC SHEET

Your choice of 5 mounting styles:
Generous front to back adjustment
Versatile rackmounting of LCD screen from 15" to 19", including some 20" monitors
RM-LCD-MT can mount larger monitors, up to 32" depending on weight
Enclosed backpan open panel
Two styles
Three mount styles: fixed, pivot/tilt, articulating

 

Thermal Management Solutions

DOWNLOAD/VIEW SPEC SHEET

Maintaining the temperature inside enclosures is critical to the proper functioning and survival of the equipment operating within them. Middle Atlantic Products offers many effective solutions for taking an integrated, system approach to thermal management of rack enclosures.

Top Options for Enclosures

DOWNLOAD/VIEW SPEC SHEET

Top options accept 4-1/2”, low-profile 6” or 10” fans for Active thermal management. Vented pagoda tops maintain enclosure temperatures through natural convection while minimizing the amount of dust and debris that can fall into the rack, and adds 1-1/2” to the top of the rack. Solid, slot pattern vented, vented and cable ladder adapter tops also available. All tops (excluding MV-PVT and MW-LA) include a removable two space service plate. Allows removal of top without disrupting cable bundles.

 

Side Panels and Related for Enclosures

DOWNLOAD/VIEW SPEC SHEET

Our SPN series side panels fit all WRK, MRK, VMRK and VRK, series enclosures. These side panels feature stylish beveled corners to match the aesthetics of the enclosure, easily lift on and off, and include an internal locking kit. Black textured powder coat finish. Sold in pairs.

 

Front / Rear Door Options for Enclosures

DOWNLOAD/VIEW SPEC SHEET

Offered in lightly smoked plexiglass, fully vented, vented plexi, large perforated vented and solid configurations. Beveled corners provide a stylistically modern appearance, while hinging either left or right. Large perf door has 64% open area, regular perf vented doors have 25% open area. Black textured powder coat finish. Includes keylock.

Protect equipment from the damaging effects of heat from servers, NVR’s and DVR’s with the adjustable 6 fan High CFM Rear Door. This cupboard style split rear door pulls hot air from the rear of the cabinet and directs it up towards return air ducts. Fan placement is adjustable for optimal airflow and up to 10 additional fans can be added for 3,520 CFM of free air movement. Two adjustable half blank panels included for versatile fan arrangement. Additional half blank panels are available for greater control of fan placement.

Vented and Blank Filler Panels

DOWNLOAD/VIEW SPEC SHEET

 

Cable Runway Systems

Ladder Rack

DOWNLOAD/VIEW SPEC SHEET

Hoffman’s Cable Runway System includes black and gray finishes for most
models to meet customer requirements. The 24-in. width offers additional
capacity for large systems. Accessories, such as the Runway Elevation Kit
and the Runway Overhead 12-in. Stack Kit, continue to be added to the
line to allow greater configuration and installation capabilities.

The Ladder Rack System conveniently routes cables via a modular
pathway through unused space on the floor, wall or ceiling while
keeping cables accessible for easy maintenance. A variety of straight
and curved sections are highly adaptable and can accommodate
virtually any room layout.

 

Bonding and Grounding

DOWNLOAD/VIEW SPEC SHEET

These components meet open frame rack and cabinet bonding and grounding requirements for telecommunication room and data center applications.

• Components specially designed to efficiently facilitate reliable connections
• Enable system to meet equipment manufacturer grounding requirements
• Components fit EIA 310-D-rated open frame racks

 

Cablofil Wire Mesh Cable Tray

Click Link for Details

These components meet open frame rack and cabinet bonding and grounding requirements for telecommunication room and data center applications.

• Components specially designed to efficiently facilitate reliable connections
• Enable system to meet equipment manufacturer grounding requirements
• Components fit EIA 310-D-rated open frame racks

 

 

Copyright 2017 Wire Supplies, Inc. All Rights Reserved.